The most compact in its class, the Christie M Series projector platform provides the high-performance and feature-rich standards expected in all Christie products. Embedded warping, blending and color matching, along with built-in portrait capabilities give you even more installation flexibility with this HD model.
The Roadster HD10K-M, at 11,000 center lumens (dual lamps, 350W), offers high efficiency and low cost of ownership by drawing a maximum power of 1320W giving you full brightness while using less power.
Features
True HD native resolution (1920 x 1080)
11,000 center lumens
Variable contrast ratio of 2500-10000:1 dynamic iris (Full on, Full off) / 650:1 ANSI for crisp, detailed images.
At maximum brightness this projector draws a maximum power of 1320W
Smallest chasis in its class
Dual mercury lamps (350W)
Two high definition input channels that allow 4:4:4 HD signals
Comprehensive Color Adjustment (CCA™)
Embedded Christie Twist™ image warping and edge-blending
Dust sealed engine, filter-free design
Motorized yellow notch filter
Intelligent Lens System (ILS™) for zoom, focus, horizontal and vertical offset
Multi-windowing and screen processing (up to a 3x3 array)
Dynamic iris
Built-in portrait display capabilities
Image | · Dual lamp: 11,000 center (10,000 ANSI) lumens · Single lamp: 5,500 center (5,000 ANSI) lumens |
Contrast | · 2500-10,000:1 using dynamic iris (full on, full off) · 650:1 ANSI (typical) |
Display technology and resolution | · 3-chip 0.95" DLP · HD (1920 x 1080) resolution |
Lamp | · Dual 350W PVIP · High power: 1500 hrs @ 350W · Low power: 2000 hrs @ 300W |
Input signal compatibility | · HDTV formats VGA through to QXGA (2048 x 1536) · Accepts all current HDTV/DTV formats · Multi-standard video decoder · Horizontal and vertical scaling, all inputs |
Scan rates | · Horizontal: 15 to 120 kHz · Vertical: 23.97 to 150 Hz |
Pixel clock | · 165 MHz |
Inputs, controls and networking | · RS232 in/out · RS422 in · Ethernet (10/100) · USB device · GPIO (RS232 9-pin male connector) · Built-in backlit LCD keypad · Remote control (with optional wired XLR connection) |
Optical system | · Dust sealed, 3-Chip DMD light engine · Motorized horizontal and veritcal lens offset · Scheimpflug (tilt) adjustment · Built-in light shutter · Tool-free lens insertion system |
Fixed lenses | · ILS lens 0.73:1 SX+/0.67:1 HD* · ILS lens 1.2:1 SX+/1.1:1 HD |
Zoom lenses | · ILS lens 1.25-1.6:1 SX+/1.16-1.49:1 HD** · ILS lens 1.5-2.0:1 SX+/1.4-1.8:1 HD · ILS lens 2.0-2.8:1 SX+/1.8-2.6:1 HD · ILS lens 2.8-4.5:1 SX+/2.6-4.1:1 HD · ILS lens 4.5-7.3:1 SX+/4.1-6.9:1 HD · ILS lens 7.3-11.2:1 SX+/6.9-10.4:1 HD |
Lens offsets | · +/- 120% Vertical · +/- 54% Horizontal · (* ±35%V / ±12%H) · (** ±100%V / ±40%H) |
Standard accessories | · Analog BNC input card · Dual-link DVI input card · Dual SD/HD-SDI input card · Video decoder · User manual · IR remote · Line cord · Stacking frame |
Optional accessories | · Coarse dust filter · Fog juice filter · Ceiling mount · Analog BNC input card · Dual-link DVI input card · Dual DS/HD-SDI input card · Video decoder · Twin HDMI™ input card · DMX512 interface card |
Enhanced feature sets | · LiteLOC™ · Comprehensive Color Adjustment (CCA™) · Embedded Christie Twist™ image warping and edge-blending · Intelligent Lens System (ILS™) for zoom, focus, horizontal and vertical offset · Multi-windowing and screen processing (up to a 2x3 array) · Dynamic iris · Menus in five languages · 99 channel memories · Auto setup · Digital keystone correction · Dust sealed engine, filter-free design · Motorized yellow notch filter (HD & WUXGA models only) · Built-in portrait display capabilities* · 3D upgradable *Christie M Series stacking frame is required in portrait orientation. |
Power requirements | · 110-240 VAC 50/60 Hz operating voltage · 13.2 A @100V operating current · 1320 W power consumption · 4508 BTU/hr dissipation |
Dimensions | · (L x W x H): 22.1 x 19.7 x 10.2" (561 x 500 x 259mm) · Weight: 55 lbs (25 kg) · Shipping weight: 87 lbs (39kg) · Shipping dimensions - (LxWxH): 31.3 x 24.2 x 28.1" (795 x 615 x 715mm) |
Operating environment | · Temp: 40 to 104° F (5 to 40° C) · Humidity: 10-80% non-condensing |
Regulatory approvals | · UL/CSA/IEC 60950 (3rd edition) · FCC Class A, CE, CCC · This product conforms to all relevant European directives, standards, safety, health and environmental concerns · RoHS, WEEE |
Limited warranty | · Three years parts and labor (including light engine) |
